View KP-61HS20_1287742.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] operating instructions ? 2001 sony corporation 4-081-143- 11 (1) kp-43ht20 kp-53hs20 kp-53hs30 KP-61HS20 kp-61hs30 projection tv operating instructions
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 2 warning to prevent fire or shock hazard, do not expose the projection tv to rain or moisture. this symbol is intended to alert the user to the presence of uninsulated ?dangerous voltage? within the product?s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. this symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. caution to prevent electric shock, do not use this polarized ac plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure. caution when using tv games, computers, and similar products with your projection tv, or viewing a tv station whose logo always stays on the screen, keep the brightness and contrast functions at low settings. if a fixed (non-moving) pattern such as a station logo is left on the screen for long periods of time, especially at a high brightness or contrast setting, the image can be permanently imprinted onto the screen. these types of imprints are not covered by your warranty. note on caption vision this television receiver provides display of television closed captioning in accordance with 15.119 of the fcc rules. note on convergence adjustment before you use your projection tv, make sure to adjust convergence. for details, see ?adjusting the convergence automatically ? flash focus? ?? on page 33. note to catv system installer this reminder is provided to call the catv system installer?s attention to article 820-40 of the nec that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. use of this television receiver for other than private viewing of programs broadcast on uhf, vhf, transmitted by cable companies or satellite for the use of the general public may require authorization from the broadcaster/cable company and/or program owner. notification this equipment has been tested and found to comply with the limits for a class b digital device pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ? reorient or relocate the receiving antennas. ? increase the separation between the equipment and receiver. ? connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ? consult the dealer or an experienced radio/tv technician for help. this document is for the remote control rm-y908. models: kp-43ht20, kp-53hs20, kp-53hs30, kp- 61hs20, kp-61hs30 please keep this notice with the instruction manual. caution risk of electric shock do not open attention risque de choc electrique, ne pas ouvrir precaucion riesgo de choque electrico caution : to reduce the risk of electric shock, do not remove cover ( or back ) . no user-serviceable parts inside. refer servicing to qualified service personnel. no abrir you are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 3 safety ? operate the projection tv only on 120 v ac. ? the plug is designed, for safety purposes, to fit into the wall outlet only one way. if you are unable to insert the plug fully into the outlet, contact your dealer. ? if any liquid or solid object should fall inside the cabinet, unplug the projection tv immediately and have it checked by qualified service personnel before operating it further. ? if you will not be using the projection tv for several days, disconnect the power by pulling the plug itself. never pull on the cord. for details concerning safety precautions, see ? important safeguards ? on page 4. installing ? to prevent internal heat buildup, do not block the ventilation openings. ? do not install the projection tv in a hot or humid place, or in a place subject to excessive dust or mechanical vibration. ? avoid operating the projection tv at temperature below 5 c (41 f). ? if the projection tv is transported directly from a cold to a warm location, or if the room temperature changes suddenly, the picture may be blurred or show poor color. in this case, please wait a few hours to let the moisture evaporate before turning on the projection tv. ? to obtain the best picture, do not expose the screen to direct illumination or direct sunlight. it is recommended to use spot lighting directed down from the ceiling or to cover the windows that face the screen with opaque drapery. it is desirable to install the projection tv in a room where the floor and walls are not of a reflective material. energy star ? is a u.s. registered mark. trusurround is a trademark of srs labs, inc. srs and the srs symbol are registered trademarks of srs labs, inc. in the united states and selected foreign countries. srs and trusurround are incorporated under license from srs labs, inc. and is protected under united states patent nos. 4,748,669 and 4, 841, 572 with numerous additional issued and pending foreign patents. purchase of this product does not convey the right to sell recordings made with the trusurround technology. bbe and bbe symbol are trademarks of bbe sound, inc. and are licensed by bbe sound, inc. under u.s. patent no. 4,638,258 and 4,482,866. attention pour pr venir les chocs lectriques, ne pas utiliser cette fiche polaris e avec un prolongateur, une prise de courant ou une autre sortie de courant, sauf si les lames peuvent tre inser es fond sans en laisser aucune partie decouvert. owner?s record the model and serial numbers are located at the rear of the projection tv, below the sony logo, on the sticker, and also on the tv box (white label). record these numbers in the spaces provided below. refer to them whenever you call upon your sony dealer regarding this product. model no. serial no. as an energy star ? partner, sony corporation has determined that this product meets the energy star ? guidelines for energy efficiency.
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 4 important safeguards for your protection, please read these instructions completely, and keep this manual for future reference. carefully observe and comply with all warnings, cautions and instructions placed on the set or described in the operating instructions or service manual. warning to guard against injury, the following basic safety precautions should be observed in the installation, use and servicing of the set. use power sources this set should be operated only from the type of power source indicated on the serial/model plate. if you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. for those sets designed to operate from battery power, refer to the operating instructions. grounding or polarization this set is equipped with a polarized ac power cord plug (a plug having one blade wider than the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). follow the instructions below: for the set with a polarized ac power cord plug this plug will fit into the power outlet only one way. this is a safety feature. if you are unable to insert the plug fully into the outlet, try reversing the plug. if the plug still fails to fit, contact your electrician to have a suitable outlet installed. do not defeat the safety purpose of the polarized plug by forcing it in. alternate warning for the set with a three- wire grounding type ac plug this plug will only fit into a grounding- type power outlet. this is a safety feature. if you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. do not defeat the safety purpose of the grounding plug. overloading do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. always turn the set off when it is not being used. when the set is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against the possibility of an internal malfunction that could create a fire hazard. if a snapping or popping sound from a tv set is continuous or frequent while the tv is operating, unplug the tv and consult your dealer or service technician. it is normal for some tv sets to make occasional snapping or popping sounds, particularly when being turned on or off. object and liquid entry never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. never spill liquid of any kind on the set. attachments do not use attachments not recommended by the manufacturer, as they may cause hazards. cleaning clean the cabinet of the projection tv with a dry soft cloth. to remove dust from the screen, wipe it gently with a soft cloth. stubborn stains may be removed with a cloth slightly dampened with solution of mild soap and warm water. never use strong solvents such as thinner or benzine for cleaning. if the picture becomes dark after using the projection tv for a long period of time, it may be necessary to clean the inside of the projection tv. consult qualified service personnel.
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 5 installation water and moisture do not use power-line operated sets near water ? for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. accessories do not place the set on an unstable cart, stand, table or shelf. the set may fall, causing serious injury to a child or an adult and serious damage to the set. use only a cart or stand recommended by the manufacturer for the specific model of projection tv. an appliance and cart combination should be moved with care. quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. ventilation the slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. to ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. ? never cover the slots and openings with a cloth or other materials. ? never block the slots and openings by placing the set on a bed, sofa, rug or other similar surface. ? never place the set in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided. ? do not place the set near or over a radiator or heat register, or where it is exposed to direct sunlight. power-cord protection do not allow anything to rest on or roll over the power cord, and do not place the set where the power cord is subject to wear or abuse. antennas outdoor antenna grounding if an outdoor antenna is installed, follow the precautions below. an outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. when installing an outdoor antenna system, extreme care should be taken to keep from contacting such power lines or circuits as contact with them is almost inva ria bly fatal. be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. section 810 of the national electrical code (nec) in usa and section 54 of the canadian electrical code in canada provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. antenna grounding according to the nec refer to section 54-300 of canadian electrical code for antenna grounding. antenna lead-in wire ground clamps antenna lead-in wire (nec section 810-20) grounding conductors (nec section 810-21) power service grounding electrode system (nec art 250 part h) ground clamp electrical service equipment nec: national electrical code
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 6 lightning for added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. this will prevent damage to the receiver due to lightning and power-line surges. service damage requiring service unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: ? when the power cord or plug is damaged or frayed. ? if liquid has been spilled into the set. ? if the set has been exposed to rain or water. ? if the set has been subject to excessive shock by being dropped, or the cabinet has been damaged. ? if the set does not operate normally when following the operating instructions. adjust only those controls that are specified in the operating instructions. improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation. ? when the set exhibits a distinct change in performance, it indicates a need for service. servicing do not attempt to service the set yourself since opening the cabinet may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. replacement parts when replacement parts are required, be sure the service technician certifies in writing that he has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. unauthorized substitutions may result in fire, electric shock or other hazards. safety check upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the set is in safe operating condition, and to so certify. when the set reaches the end of its useful life, improper disposal could result in a picture tube implosion. ask a qualified service technician to dispose of the set. for safety be careful when moving the projection tv when you place the projection tv in position, be careful not to drop it on your foot or fingers. watch your footing while installing the projection tv. carry the projection tv in the specified manner if you carry the projection tv in a manner other than the specified manner and without the specified number of persons, it may drop and a serious injury may be caused. be sure to follow the instructions mentioned below. ? carry the projection tv with the specified number of persons. (see page 10) ? do not carry the projection tv holding the speaker grill. ? hold the projection tv tightly when carrying it.
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 7 contents important safeguards ...............................................4 introducing the sony projection tv presenting the sony projection tv..........................8 using this manual ....................................................9 installing and connecting the projection tv contents .................................................................10 inserting batteries to the remote control .............10 carrying your projection tv ................................10 installing the projection tv...................................11 connector types ....................................................12 projection tv controls and connectors ................13 basic connections (connecting cable tv or antenna).........................................................16 connecting a vcr and cable................................19 connecting a vcr and cable box ........................20 connecting two vcrs for tape editing ..............22 connecting a satellite receiver .............................23 connecting a satellite receiver with a vcr.........24 connecting an audio receiver ..............................25 connecting a dvd player with component video connectors ..........................................26 connecting a dvd player with a/v connectors .............................................27 connecting a digital tv receiver.........................28 connecting a camcorder .......................................29 connecting an av receiver ..................................30 using the control s feature............................31 setting up the projection tv automatically.........32 adjusting the convergence automatically ? flash focus ? ? ...................................33 using the features using the remote control .....................................34 watching the tv....................................................37 watching the digital tv .......................................39 using favorite channels........................................40 using twin view ? ...............................................41 using the freeze function .....................................44 using channel index .............................................45 using the menus overview................................................................47 using the video menu..........................................48 using the audio menu..........................................50 using the channel menu ......................................52 using the parent menu .........................................54 using the timer menu..........................................62 using the setup menu ..........................................63 other information programming the remote control.........................65 operating other components with your projection tv remote control......................68 troubleshooting.....................................................70 specifications.........................................................73
8 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] introducing the sony projection tv presenting the sony projection tv thank you for purchasing the sony projection tv. this manual is for models kp-43ht20, kp-53hs20, kp-53hs30, kp- 61hs20 and kp-61hs30. model kp-53hs30 is used for illustration purposes. features some of the features that you will enjoy with your new projection tv include: ? hi scan 1080 ? : enables you to receive the 1080i, 720p, 480p and 480i digital tv formats. by using the video 5/6 in jacks, you can connect a dtv (digital television) receiver to view dtv programs. ? drc ? multi-function: unlike conventional line doublers, the drc feature doubles vertical and horizontal lines, resulting in four times the density for quality sources such as dvd, satellite and digital camcorder. ? cinemotion ? : using the 2-3 pull-down technology, the cinemotion feature allows you to obtain a smooth picture movement when playing back movies or other video sources on film. ? twin view ? : using multi-image driver (mid-x), twin view allows you to watch two programs side by side with the ability to zoom in one picture and listen to selected window. you can watch pictures from two different sources (1080i, 720p, 480p or 480i) simultaneously. ? 16:9 enhancement: vertical compression technology that maximizes picture resolution on ? anamorphic ? or ? enhanced for wide screen ? sources, including selected dvds. ? steady sound ? : equalizes volume levels so there is consistent output between programs and commercials. ? parental control: v-chip technology allows parents to block unsuitable programming for younger viewers. ? component video inputs: offers the best video quality for dvd (480p, 480i) and digital set-top box (1080i, 720p, 480p, 480i) connections. ? s-video inputs: provides a high-quality image for connected equipment. ? favorite channel preview: preview up to eight favorite channels without leaving the current channel.
introducing the sony projection tv 9 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] introducing the sony projection tv ? channel index : allows you to view and choose from twelve programs. ? flash focus ? : allows you to adjust convergence automatically. using this manual we recommend that you carefully review the contents of the following four sections in the order provided to ensure that you fully understand the operation of your new projection tv. 1 1 1 1 installing and connecting the projection tv this section guides you through your initial setup. it shows you how to install your projection tv, to connect your new components and to connect the antenna and cable. 2 2 2 2 using the features this section shows you how to begin using your new projection tv. it shows you how to use your remote control functions. 3 3 3 3 using the menus this section teaches you how to access on-screen menus and adjust your projection tv settings. instructions in this manual are written for the remote control. similar controls may be found on the projection tv console.
10 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv contents your box contains your new projection tv, a remote control and two aa batteries. no peripheral cables are included. if you intend to add additional equipment to your projection tv, please check the hookup instructions for your desired setup before you begin. you may need to purchase cables and/ or splitters to complete the hookup properly. inserting batteries to the remote control insert two size aa (r6) batteries (supplied) by matching the + and ? on the batteries to the diagram inside the battery compartment. carrying your projection tv carrying the projection tv requires three or more people. the projection tv has been equipped with casters for easy movement on a hard surface. (for kp-53hs20, kp-53hs30, KP-61HS20 and kp-61hs30 only) please move your projection tv using the casters. ? remove the batteries to avoid damage from possible battery leakage whenever you anticipate that the remote control will not be used for an extended period. ? handle the remote control with care. avoid dropping it, getting it wet, or placing it in direct sunlight, near a heater, or where the humidity is high. ? your remote control can be programmed to operate most video equipment. (see ?programming the remote control? on page 65.) e e e e
installing and connecting the projection tv 11 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv installing the projection tv recommended viewing area (horizontal) 60? 60 60? min. 1.8 m (approx. 6 ft.) 43" min. 2.1 m (approx. 7 ft.) 53" min. 2.4 m (approx. 8 ft.) 61" 20 ? 20 ? min. 2.1 m (approx. 7 ft.) 53" min. 2.4 m (approx. 8 ft.) 61" min. 1.8 m (approx. 6ft.) 43" recommended viewing area (vertical)
installing and connecting the projection tv 12 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connector types you may find it necessary to use some of the following connector types during set up. coaxial cable standard tv cable and antenna cable s video cable high quality video cable for enhanced picture quality audio/video cable video - yellow audio (left) - white audio (right) - red some dvd players are equipped with the following three video connectors. y - green p b (c b , c b or b ? y) - blue p r (c r , c r or r ? y) - red control s cable control s connections are exclusive to sony products and allow greater control of all sony equipment. plug type screw-on type push into connection. screw into connection. align guides and push into connection. push into connection. push into connection.
installing and connecting the projection tv 13 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv projection tv controls and connectors front panel menu controls the front panel menu controls allow access to the on-screen menus without the use of a remote control. pressing menu brings up the on-screen menus. the arrow buttons move the on-screen cursor in the menus and the select button ( ) selects the menu item.
installing and connecting the projection tv 14 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] projection tv rear and front/side panel connectors rear of projection tv front or side of projection tv kp-43ht20 kp-53hs20, kp-53hs30, KP-61HS20 and kp-61hs30
installing and connecting the projection tv 15 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv connection description 1 allows you to view local and cable channels if your cable provider does not feature local channels. you can switch between local and cable channels easily by pressing ant on the remote control. devices connected to the aux input cannot be viewed in twin view. 2 this is a vhf/uhf out jack that lets you set up your projection tv to switch between scrambled channels (through a cable box) and normal cable channels (catv). use this jack instead of a splitter to get better picture quality when switching between scrambled and unscrambled cable channels. 3 connects to your vhf/uhf antenna or cable. 4 (rear and front/ side) connects to the s video out jack of your vcr or other s video-equipped video component. provides better picture quality than the vhf/uhf jacks or the video in jack. 5 connects to the audio and video out jacks on your vcr or other video component. a fourth video input (video 2) is located on the side panel (for kp-43ht20) or the front panel (for kp-53hs20, kp-53hs30, KP-61HS20 and kp-61hs30) of the projection tv. 6 connects to your dvd player ? s or digital set-top box ? s component video (y, p b , p r ) and audio (l/r) jacks. 7 connects to an av receiver for greater control of all audio and video equipment. (see page 30) for detailed information about connection, refer to the operating manual supplied with the av receiver. 8 connects to the left and right audio inputs of your audio or video component. 9 to control other sony equipment with the projection tv's remote control, connect the control s in jack of the equipment to the control s out jack on the projection tv with the control s cable. to control the projection tv with a remote control for another sony product, connect the control s out jack of the equipment to the control s in jack on the projection tv with the control s cable.
installing and connecting the projection tv 16 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] basic connections (connecting cable tv or antenna) connecting directly to cable or an antenna the connection you choose depends on the cable found in your home. newer homes are equipped with standard coaxial cable (see a a a a ); older homes probably have 300-ohm twin lead cable (see b b b b ); other homes may contain both (see c c c c ). a b c cable and antenna if your cable provider does not feature local channels, you may find this set up convenient. select cable or antenna (ant) mode by pressing ant on the remote control. 75-ohm coaxial cable rear of projection tv vhf/uhf rear of projection tv antenna connector 300-ohm twin lead cable vhf/uhf rear of projection tv 75-ohm coaxial cable vhf/uhf u/v splitter (not supplied) 300-ohm twin lead cable ? to receive channels with an antenna, you need to turn your cable to off (see page 52) and perform the auto program function (see page 53). catv cable rear of projection tv to converter (no connection to to converter) vhf/uhf antenna cable aux
installing and connecting the projection tv 17 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv cable box connections cable box and cable this is the preferred basic cable tv hookup to use if: ? your cable tv company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and ? you want to enjoy the twin view feature. with this setup you can: ? use the projection tv remote control to change channels using your cable box when the signal is scrambled. ? use the projection tv remote control to change channels using your projection tv when the signal is not scrambled. (your projection tv ? s tuner provides a better signal than the cable box.) ? use the twin view feature. (when all channels are routed through your cable box, only one channel is sent to the projection tv, so you can not use the twin view or channel index features for your cable box.) 1 connect the cable tv cable to the projection tv ? s vhf/uhf jack. 2 using a coaxial cable, connect the projection tv ? s to converter jack to the cable box ? s in jack. the projection tv ? s internal converter allows you to switch between unscrambled signals coming straight into the projection tv and scrambled signals coming in through the cable box, eliminating the need for an external splitter. 3 using a coaxial cable, connect the cable box ? s out jack to the projection tv ? s aux jack. ? pressing ant on the remote control switches between the channels coming in through the cable box (scrambled) and those coming directly to the tv (unscrambled). rear of projection tv to converter vhf/uhf aux cable box out in signal 75-ohm coaxial cable (not supplied) catv cable (unscrambled channels) (continued)
installing and connecting the projection tv 18 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] cable box only use this hookup if: ? you subscribe to a cable tv system that uses scrambled or encoded signals requiring a cable box to view all channels, and ? you do not intend to hook up any other audio or video equipment to your projection tv. when all channels are routed through your cable box, only one unscrambled channel is sent to the projection tv, so you cannot use the twin view feature. if some channels are scrambled, but others are not, consider using the hookup on page 17 instead. 1 connect the coaxial connector from your cable service to the cable box ? s in jack. 2 using a coaxial cable, connect the cable box ? s out jack to the tv ? s vhf/uhf jack. also, set cable to on in the channel menu. (see page 52) ? if you will be controlling all channel selection through your cable box, consider using the channel fix feature to set your projection tv to channel 3 or 4. (see page 53) ? your sony remote control can be programmed to operate your cable box. (see ? programming the remote control ? on page 65) ? to change channels using the cable box, set your projection tv to channel 3 or 4 depending on the cable box channel output. vhf/uhf rear of projection tv cable in out cable box setting the channel fix feature in the channel menu (see ? using the channel menu ? on page 52) ensures that you do not accidentally switch the channels using your projection tv. z
installing and connecting the projection tv 19 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv connecting a vcr and cable use this hookup if: ? you have cable tv that does not require a cable box. disconnect all power sources before making any connections. 1 connect the cable tv cable to the vcr ? s in jack. 2 using a coaxial cable, connect the vcr ? s out jack to the projection tv ? s vhf/uhf jack. 3 using audio and s video cables, connect the vcr ? s audio and video out jacks to the projection tv ? s audio and s video in jacks. coaxial cable rear of projection tv video (yellow) audio-l (white) audio-r (red) cable vcr vmc-810s/820s (not supplied) s video yc-15v/30v (not supplied) ? if your vcr is not equipped with s video, use a video cable (yellow) instead of the s video cable.
installing and connecting the projection tv 20 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connecting a vcr and cable box use this hookup if: ? your cable tv company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and ? you want to enjoy the twin view feature. with this setup you can: ? use the projection tv remote control to change channels using your cable box when the signal is scrambled. ? use the projection tv remote control to change channels using your projection tv when the signal is not scrambled. your projection tv ? s tuner provides a better signal than the cable box. ? use the twin view feature. (when all channels are routed through your cable box, only one signal is sent to the projection tv, so you cannot use the twin view feature.) disconnect all power sources before making any connections. 1 connect the cable tv cable to the projection tv ? s vhf/uhf jack. 2 using a coaxial cable, connect the tv ? s to converter jack to the cable box ? s in jack. the projection tv ? s internal converter allows you to switch between unscrambled signals coming straight into the projection tv and scrambled signals coming in through the cable box, eliminating the need for an external splitter. 3 using a coaxial cable, connect the cable box ? s out jack to the vcr ? s in jack. 4 using audio and s video cables, connect the vcr ? s audio and s video out jacks to the projection tv ? s audio and s video in jacks. 5 using a coaxial cable, connect the vcr ? s out jack to the projection tv ? s aux jack. ? to view scrambled channels, set your projection tv to aux 3 or 4 (depending on your cable box output). change channels using your cable box.
installing and connecting the projection tv 21 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv coaxial cable cable box vcr rear of projection tv video (yellow) audio-l (white) audio-r (red) vmc-810s/820s (not supplied) coaxial cable yc-15v/30v (not supplied) s video ? if your vcr is not equipped with s video, use a video cable (yellow) instead of the s video cable. ? you will not be able to change channels on the vcr. set your projection tv and vcr to channel 3 or 4, depending on your cable box channel output. ? pressing ant on the remote control switches between the channels coming in through the cable box (scrambled) and those coming directly to the projection tv (unscrambled).
installing and connecting the projection tv 22 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connecting two vcrs for tape editing connecting two vcrs together, then into the projection tv, allows you to switch between the two to be sure that what you are playing on one is recording on the other. disconnect all power sources before making any connections. 1 using audio and video cables, connect the playback vcr ? s audio and video out jacks to the recording vcr ? s audio and video in jacks. 2 using audio and video cables, connect the recording vcr ? s audio and video out jacks to the projection tv ? s audio and video in jacks. rear of projection tv vcr (playback) vcr (recording) vmc-810s/820s (not supplied) audio-r (red) audio-l (white) video (yellow) ? to perform tape editing, set the projection tv to the video input intended for playback by pressing tv/video on the remote control. ? you may need to change the video input on your vcr. consult your vcr ? s operating manual for instructions. ? if your vcrs have an s video jack: for best picture quality, use an s video connection instead of the yellow video cable on your combined a/v cable. using an s video cable, connect the playback vcr ? s s video out jack to the recording vcr ? s s video in jack. s video does not provide audio, so audio cables must still be connected to provide sound. ? you cannot record signals from equipment connected to the y, p b , p r input.
installing and connecting the projection tv 23 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv connecting a satellite receiver disconnect all power sources before making any connections. 1 connect the satellite antenna cable to the satellite receiver ? s satellite in jack. 2 using audio and s video cables, connect the satellite receiver ? s audio and s video out jacks to the projection tv ? s audio and s video in jacks. 3 connect a coaxial cable from your cable or antenna to the projection tv ? s vhf/uhf jack. ? if your satellite receiver is not equipped with s video, use a video cable (yellow) instead of the s video cable. coaxial cable satellite receiver vmc-810s/820s (not supplied) r ear of projection tv video (yellow) audio-l (white) audio-r (red) satellite antenna cable s video yc-15v/30v (not supplied)
installing and connecting the projection tv 24 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connecting a satellite receiver with a vcr disconnect all power sources before making any connections. 1 connect the satellite antenna cable to the satellite receiver ? s satellite in jack. 2 connect the catv cable to the vcr ? s vhf/uhf in jack. 3 using a coaxial cable, connect the vcr ? s out jack to the projection tv ? s vhf/uhf jack. 4 using audio and s video cables, connect the satellite receiver ? s audio and s video out jacks to the vcr ? s audio and s video in jacks. 5 using audio and s video cables, connect the vcr ? s audio and s video out jacks to the tv ? s audio and s video in jacks. coaxial cable rear of projection tv s video audio-r (red) audio-l (white) video (yellow) satellite receiver vcr yc-15v/30v (not supplied) vmc-810s/ 820s (not supplied) yc-15v/30v (not supplied) vmc-810s/820s (not supplied) satellite antenna cable cable ? be sure your vcr ? s video input is set correctly. consult your vcr ? s operating manual for instructions. ? use tv/video to select - video 1 to watch satellite tv or the vcr. (your vcr must be turned on) - vhf/uhf to watch cable tv. ? if your vcr or satellite receiver is not equipped with s video, use a video cable (yellow) instead of the s video cable.
installing and connecting the projection tv 25 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv connecting an audio receiver disconnect all power sources before making any connections. using audio cables, connect the projection tv ? s audio out (var/fix) jacks to the audio receiver ? s audio line in jacks. rear of projection tv audio-r (red) audio-l (white) line input rk-74a (not supplied)
installing and connecting the projection tv 26 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connecting a dvd player with component video connectors this is the preferred hookup to use if: ? your dvd player has component (y, p b , p r ) jacks. disconnect all power sources before making any connections. 1 using three separate component video cables, connect the dvd player ? s y, p b and p r jacks to the y, p b and p r jacks on the projection tv. use the video in 5 or 6 connections. 2 using an audio cable, connect the dvd player ? s audio out jacks to the projection tv ? s audio in jacks. be sure to use the same row of inputs that you used for the video connection (video in 5 or 6). ? the y, p b and p r jacks on your dvd player are sometimes labeled y, c b and c r , or y, b-y and r-y. if so, connect the cables to like colors. vmc-10hg (not supplied) rear of projection tv rk-74a (not supplied) dvd player audio-r (red) audio-l (white) p r p b y
installing and connecting the projection tv 27 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv connecting a dvd player with a/v connectors use this hookup if: ? your dvd player does not have component (y, p b , p r ) jacks. disconnect all power sources before making any connections. 1 using audio cables, connect the dvd player ? s audio out jacks to the projection tv ? s audio in jacks. 2 using an s video cable, connect the dvd player ? s s video jack to the projection tv ? s s video jack. ? if your dvd player has video component output connectors: for best picture quality use the connection described on page 26. rear or projection tv yc-15v/30v (not supplied) dvd player rk-74a (not supplied) audio-r (red) audio-l (white) s video ? use tv/video on the remote control to switch between the vcr, dvd player and cable tv inputs.
installing and connecting the projection tv 28 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connecting a digital tv receiver disconnect all power sources before making any connections. 1 using three separate component video cables, connect the digital tv set-top box ? s y, p b and p r jacks to the projection tv. 2 using an audio cable, connect the digital tv set-top box ? s audio out jacks to the projection tv ? s audio in jacks. ? the y, p b and p r jacks do not provide audio, so audio cables must be connected to provide sound. component input (y, p b and p r ) is recommended for optimum picture quality. component input is necessary to view 480p, 720p and 1080i formats. you may also use component video or s video connections. be sure to read the set-top box manual. z ? you cannot record the signal from any equipment connected into the y, p b and p r connectors. ? this projection tv is not compatible with digital tv receivers configured with rgb or vga output connectors.
installing and connecting the projection tv 29 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv connecting a camcorder for easy connection of the camcorder, the projection tv has front audio and video inputs (shown below). however, if you prefer, you can also connect the camcorder to the projection tv ? s rear audio and video in jacks. using audio and s video cables, connect the camcorder ? s audio and s video out jacks to the projection tv ? s audio and s video in jacks. ? if you have a mono camcorder, connect its left audio output to the projection tv ? s audio l jack. ? if your camcorder is not equipped with s video, use a video cable (yellow) instead of the s video cable. video (yellow) a/v output audio-l (white) audio-r (red) s video yc-15v/30v (not supplied) vmc-810s/820s (not supplied) kp-43ht20 kp-53hs20, kp-53hs30, KP-61HS20, and kp-61hs30
installing and connecting the projection tv 30 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] connecting an av receiver for greater control of all audio and video equipment, connect an av receiver. disconnect all power sources before making any connections. 1 connect the coaxial cable from the incoming cable connection or antenna to in on the vcr. 2 using a coaxial cable, connect out on the vcr to vhf/uhf on the projection tv. 3 using a video cable, connect video of video 1 in on the projection tv to monitor out on the av receiver. 4 using an audio/video cable, connect tv out on the projection tv to audio/video 2 in on the av receiver. 5 using an audio/video cable, connect the video equipment to the av receiver. 6 select the setup menu and set ? video label ? to ? receiver ? to fix your tv ? s input to av receiver. (see ? video label ? on page 64) ? change ? video label ? for the video 1 input to ? receiver. ? (see page 64) rear of projection tv audio-l audio-r vmc-10hg (not supplied) cable/ antenna coaxial cable (not supplied) vmc-810s/820s (not supplied) vmc-810s/820s (not supplied) audio/ video 1 in audio/video 1 out av receiver vmc-810s/820s (not supplied) monitor out video video vcr audio/ video 2 in
installing and connecting the projection tv 31 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv using the control s feature control s allows you to control your projection tv system and other sony equipment with one remote control. in addition to allowing you to control multiple devices with one remote control, the control s feature allows you to always point your remote control at your projection tv, instead of having to point it at the other equipment, which might be hidden or out of direct line of sight. rear of projection tv
installing and connecting the projection tv 32 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] setting up the projection tv automatically after you finish connecting your projection tv, you can run auto setup to set up your channels. the auto setup screen appears when you turn your projection tv on for the first time after installing it. if you do not want to set up the channels at this time, you can do it later by using the auto program feature in the channel menu. (see page 53) using auto setup 1 press power on the front panel of your projection tv or on the remote control to turn on the projection tv. 2 press the tv (function) button on your remote control. red light will briefly appear. 3 press ch+ on your projection tv to run auto setup, or press ch ? to exit. if you use the channel buttons on your remote control, be sure to use the main set of buttons ( ). ? the auto setup feature does not apply for installations that use a cable box for all channel selection. ? you can run auto program by selecting it in the channel menu, as described on page 53. projection tv front panel
installing and connecting the projection tv 33 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] installing and connecting the projection tv adjusting the convergence automatically ? flash focus? ? the projection tube image appears on the screen in three layers (red, green and blue). if they do not converge, the color is poor and the picture blurs. before you use your projection tv, be sure to adjust the convergence. the flash focus feature allows you to adjust the convergence automatically. 1 receive a tv or cable tv program. 2 press flash focus . the cross pattern appears and flash focus begins to work. the adjustment is completed when the cross pattern becomes white and will come back to the program you are watching. to obtain an optimum convergence for digital tv programs the optimum convergence alignment varies with digital tv formats. whenever you find that the picture blurs, press flash focus . ? it is recommended to perform flash focus about 30 minutes after the projection tv is first turned on. projection tv front panel ? you cannot perform any other functions until flash focus has completed its cycle. ? if you perform any other operation while flash focus is in progress, flash focus operation is canceled. ? unshielded speakers or other metallic objects can cause picture distortion if placed close to the projection tv.
34 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features using the remote control the following table describes the buttons on the remote control that are for more advanced functions. button descriptions outside panel ? main power button must be turned on to activate the remote control. button description 1 press to mute the sound. press again or press vol + to restore the sound. 2 press repeatedly until the projection tv displays the time in minutes (15, 30, 45, 60, or 90) that you want the projection tv to remain on before shutting off automatically. cancel by pressing until sleep off appears. while sleep feature is set, press once to view remaining time. 3 changes between the vhf/uhf input to the aux input. 4 press once to display the current time and channel label (if set) and channel number. press again to turn display off. see page 62 for details on setting the time. 5 press to jump back and forth between two channels. the projection tv alternates between the current channel and the last channel that was selected. 6 freezes the window picture. press again to restore the picture. 7 index press to enter the channel index mode. you can view and select from twelve channels without leaving the current one. 8 joystick allows for movement of the on-screen cursor. pressing down on the center of the joystick selects the item. 9 ? adjusts the volume. q; press repeatedly to step through the available video picture modes: vivid, standard , movie and pro . also available in the video menu. for details, see ? selecting video options ? on page 48. qa displays the favorite channels list. for details, see ? using favorite channels ? on page 40. qs press when in a menu to reset the settings to the factory defaults.
using the features 35 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features qd turn on and off the projection tv and other audio/video equipment you have programmed into the remote control. for instructions, see ? programming the remote control ? on page 65. qf select the equipment (tv, sat/cable) that you want to operate. the indicator lights up momentarily when pushed to show which device the remote control is operating. qg cycles through the video equipment connected to your projection tv ? s video inputs: tv , video 1 , video 2 , video 3 , video 4 , video 5 and video 6 . qh ? 9 and enter press 0 - 9 to select a channel, the channel changes after 2 seconds. press enter to select immediately. qj turns on/off twin view. for details, see ? using twin view ?? on page 41. displays the program guide of your satellite. qk press to display the projection tv on-screen menu. press again to exit from the menus. ql ? scan through channels. w; press repeatedly to step through the available high- resolution picture modes: interlaced, progressive and cinemotion . for details, see ? using the video menu ? on page 48. button description to scan rapidly through the channels, press and hold down ch+ or ch ? . z
using the features 36 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] inside panel button description 1 press to turn off the projection tv and all equipment connected with s-link. 2 n play 3 m rewind 4 record 5 x stop 6 displays the dvd menu. 7 press to scroll through the multi-channel tv sound (mts) options: stereo , auto sap , and mono . 8 used for programming the remote control to operate non- sony video equipment. for details, see ? programming the remote control ? on page 65. 9 press to turn on the dvd/vcr player you have programmed into the remote control. for instructions, see ? programming the remote control ? on page 65. q; m fast-forward qa use to switch control for connected video equipment. you can program one video source for each switch position. for details, see ? programming the remote control ? on page 65. qs x pause (press again to resume normal playback) qd displays the dvd title. qf m m < , use to operate the dvd menu. qg press to select an audio option: steady sound on or off .
using the features 37 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features watching the tv many tv features can be accessed directly through the remote control. the following will explain the function of some buttons found on your remote control. buttons for projection tv operations 1 activates the remote control for use with the projection tv. 2 (aux input) press to change between the vhf/uhf input and the aux input. (for detailed connection information, see ? cable and antenna ? on page 16 or ? cable box connections ? on page 17) 3 turns the projection tv on and off. if a video input indication (e.g., video 1, video 2) appears on the screen, press tv/video or ch +/ ? until a channel number appears. 4 use for direct channel selection. press 0-9 to select a channel (for example, to select channel 10, press 1 and 0 ). the channel will change after 2 seconds, or you can press enter for immediate selection. 5 press to scan through the channels (+ up or ? down). 6 press to adjust the volume (+ up or ? down). 7 press to alternate or jump back and forth between two channels. the projection tv will jump between the current channel and the last channel selected. 8 press to mute the sound. ? muting ? will appear on the screen and will dim three seconds later. to restore sound, press again or press vol + . 9 (yellow labeled button) this is useful when you need to copy down information that appears on the tv ? s screen. (see ? using the freeze function ? on page 44) (continued)
using the features 38 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] q; press repeatedly until the projection tv displays the approximate time in minutes (15, 30, 45, 60, or 90) that you want the projection tv to remain on before shutting off automatically. cancel by pressing sleep until ? sleep off ? appears. qa press to display the channel number, current time and channel label (if set). to turn the display off, press display again. qs press repeatedly to scroll through available video inputs: tv, video 1, video 2, video 3, video 4, video 5 and video 6. if you select skip as a video label in the setup menu, your projection tv will skip the video input you selected. (see ? video label ? on page 64) qd press to scroll through the multi-channel tv sound (mts) options. (see ? mts ? on page 50) qf press pic mode repeatedly to directly choose one of five different video modes that best suits the program you are watching. vivid : select for enhanced picture contrast and sharpness. standard : select to display a standard picture for normal viewing environments. movie : select to display a finely detailed picture for low light environments. pro (professional) : select to display a picture with minimum enhancements. when you select each mode, you can also adjust the picture quality (such as brightness, color, etc.) to suit your taste. for details, see ? mode ? on page 48.
using the features 39 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features watching the digital tv when you have connected the dtv receiver, you can enjoy digital tv programs. this projection tv is capable of receiving the 1080i, 720p, 480p and 480i digital tv formats. to view a digital tv program 1 1 1 1 connect the dtv receiver to video 5 or 6 in on the projection tv. (for details, see page 28) 2 2 2 2 press tv/video to select video 5 or 6. 3 3 3 3 select a digital channel on the dtv receiver. for details, see the operating manual of the dtv receiver. 4 4 4 4 adjust the volume on this projection tv as necessary. ? this projection tv is not capable of displaying a native 720p format signal. when the 720p format signal is received, it is converted into a 480p format signal. ? the optimum convergence alignment varies with digital tv formats. whenever you find that the picture blurs, press flash focus. (for details, see page 33)
using the features 40 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using favorite channels the favorite channel feature lets you select programs from a list of favorite channels that you preset. to display a list of your favorite channels: 1 1 1 1 press favorites . the favorite channel options appear. 2 2 2 2 move the joystick up or down to highlight the channel you want to watch. the program on that channel appears in the preview window. press to select. ? your favorite channel options can be set automatically or manually. the factory setting for favorite channel is auto. when favorite channel is set to auto, the last eight channels selected with 0-9 buttons will be set as favorite channel options. if you want to input your own selections as favorite channel settings, see ? favorite channel ? on page 52. preview window
using the features 41 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features using twin view ? twin view enables you to watch two programs at the same time. you can also change the size of both the left and right pictures. displaying twin pictures to display twin pictures 1 1 1 1 make sure your projection tv is tuned to a working channel. 2 2 2 2 press . to cancel twin pictures ? press again (or press ). activating the picture although two pictures appear on the screen at the same time, only one picture is active. change the picture size by using the joystick. for an active picture, you can: ? change channels. ? adjust the volume. ? switch the input sources from vhf/uhf to cable by pressing ant or tv/video to switch the video input. ? change the picture size by pressing the joystick up or down. to activate the right picture ? move the joystick to the right. to activate the left picture ? move the joystick to the left. , , , , (continued)
using the features 42 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] ? when you adjust the twin screen sizes, the projection tv memorizes the change. the next time you use the twin view feature with 480i or 480p format input source, the memorized sizes appear. ? when viewing an enhanced 16:9 picture, the aspect ratio changes to 4:3 in twin view. the picture will be reformatted to that aspect ratio. ? if viewing a 720p or 1080i format input source, the aspect ratio will maintain the original 16:9 aspect ratio. ? hookups that affect your ability to use twin view: - if you are viewing all channels through the cable box, the twin view feature will not work. the cable box only unscrambles one signal at a time, so the right picture will be the same as the left picture. - you can watch a scrambled cable channel and another video source. be sure your dvd player, vcr or satellite receiver are connected to one of the video in 1-6 and aux inputs on the rear of the projection tv. pictures from equipment connected to video 5, 6 and aux will only appear in the left picture, not in the right. ? the active picture is highlighted in cyan.
using the features 43 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features changing the picture size the zoom feature lets you change the size of the left and right pictures. to enlarge the left picture (reduce the right) 1 1 1 1 move the joystick left to activate the left picture (if not already activated). 2 2 2 2 move the joystick up to enlarge the picture and move the joystick down to reduce the picture. to enlarge the right picture (reduce the left) 1 1 1 1 move the joystick right to activate the right picture (if not already activated). 2 2 2 2 move the joystick up to enlarge the picture and move the joystick down to reduce the picture. ? when you adjust the twin screen sizes, the projection tv memorizes the change. the next time you use the twin view function, the memorized sizes appear.
using the features 44 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the freeze function the freeze button allows you to temporarily capture a program ? s picture. you can use this feature to write down information such as phone numbers, recipes, etc. to use the freeze function 1 1 1 1 when the program information you want to capture is displayed, press freeze . 2 2 2 2 the projection tv switches to twin view mode and displays the ? frozen ? picture on the right, while the current program continues on the left. 3 3 3 3 to cancel and return to normal viewing, press freeze. ? freeze feature is not available if you are already in twin view ? mode. current program in progress frozen picture call 555-1234
using the features 45 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the features using channel index channel index allows you to display multiple channels and select one directly. the channels used for channel index will come directly from the projection tv ? s list of receivable channels (those set during ? auto program ? on page 53) to use the channel index function 1 1 1 1 press . the current channel will be reduced in size and displayed in the center of the screen in normal motion picture format. the first twelve receivable channels will appear one after another, clockwise, around the center picture. these small pictures are updated in intervals of one second. the channel number and channel caption (if set) on the second and later appearances will dim. a cyan-colored frame will appear to indicate current channel selection. 2 2 2 2 move the joystick in any direction to move the cyan frame to the channel that you wish to view, and press . the selected channel will zoom in and move to the center, and the sound of that channel will be heard. ? channel index will not function when parental lock is activated. (see ? using the parent menu ? on page 54.) (continued)
using the features 46 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] for the center picture you can: ? change the channel by pressing 0-9 and enter . ? switch the input sources from vhf/uhf to cable by pressing ant or to the video input by pressing tv/video , without changing the surrounding channels. 3 3 3 3 if you wish to view another channel, repeat step 2. to view another twelve channels, press ch+ . to view the previous twelve, press ch ? . to view the normal picture of the selected channel, proceed to step 4. 4 4 4 4 press . the center picture will be enlarged for normal viewing. to cancel channel index ? press again to resume normal viewing. ? sound will only be heard from the center picture. ? if one of the pictures received through channel index is snowy, the entire screen may become unstable. in this case, erase the snowy channel. (see ? channel skip/add ? on page 53) ? if you leave the channel index screen displayed for an hour without any additional operation, channel index is canceled and the normal picture reappears.
47 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus overview opening and choosing a menu: 1 1 1 1 press menu to display the menu screen. 2 2 2 2 move the joystick to the desired menu icon and press to select it. 3 3 3 3 use the joystick to scroll through the features. 4 4 4 4 see the specific menu page for instructions on moving through the menu. the menu gives you access to the following features: menu icon description page allows you to make adjustments to your picture settings. it also allows you to customize the picture mode based on the type of program you are viewing. 48 offers enhanced audio options such as listening to second audio programming (sap), or customizing the effect of the sound on your projection tv. 50 allows you to set up a favorite channel list, run the auto program function, and more. 52 lets you control the viewing of programs based on their ratings. 54 lets you set the clock on your projection tv and allows you to program your projection tv for scheduled viewing using the timers. 62 provides several options for setting up your channels, labeling your video inputs, and selecting the language of the on-screen menus. 63 to end a menu session: press menu again. to end one menu session and move to another: press the joystick v
using the menus 48 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the video menu to select the video menu 1 1 1 1 press menu . 2 2 2 2 move the joystick to the video icon and press . 3 3 3 3 use the joystick to scroll through the features. 4 4 4 4 press to select a feature. that feature ? s adjustment appears. 5 5 5 5 use the joystick to make the desired adjustments. 6 6 6 6 press to select/set. 7 7 7 7 press menu to exit the menu screen. to restore the factory default settings for picture, brightness, color, hue, sharpness and color temp ? press reset on the remote control when in the video menu. selecting video options the video menu includes the following options. to quickly and easily change from one video mode to another, use the pic mode on the remote control. z option description mode customized picture viewing vivid select for enhanced picture contrast and sharpness. standard recommended for normal viewing conditions. movie select for soft, film like, picture. pro select for professional monitor like appearance. ? you can alter the video menu settings (picture, brightness, color, etc.) for each mode. picture adjust to increase picture contrast and deepen the color or decrease picture contrast and soften the color. brightness adjust to brighten or darken the picture. color adjust to increase or decrease color intensity. hue adjust to increase or decrease the green tones. sharpness adjust to sharpen or soften the picture. color temp white intensity adjustment choose from three color temperatures: cool select to give the white colors a blue tint. neutral select to give the white colors a neutral tint. warm select to give the white colors a red tint (ntsc- standard).
using the menus 49 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus drc mode digital reality creation creates a high-resolution picture with 4x density, for high quality sources (i.e., dvd player, satellite receiver). select from interlaced, progressive and cinemotion. interlaced recommended for moving pictures. progressive recommended for still images and text. cinemotion recommended for 24 frame-per-second films. option description
using the menus 50 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the audio menu to select the audio menu 1 1 1 1 press menu . 2 2 2 2 move the joystick to the audio icon and press . 3 3 3 3 use the joystick to scroll through the options. 4 4 4 4 press to select an option. that option ? s settings appear. 5 5 5 5 use the joystick to scroll through the settings. 6 6 6 6 press to select the desired setting. 7 7 7 7 press menu to exit the menu screen. to restore the factory default settings for treble, bass and balance ? press reset on the remote control when in the audio menu. selecting audio options the audio menu includes the following options: option description treble adjust to increase or decrease higher-pitched sounds. bass adjust to increase or decrease lower-pitched sounds. balance adjust to emphasize left or right speaker balance. steady sound on select to stabilize the volume. off select to turn off steady sound. effect trusurround select for surround sound (for stereo programs only). simulated adds a surround-like effect to mono programs. off normal stereo or mono reception. mts enjoy stereo, bilingual and mono programs stereo select for stereo reception when viewing a program broadcast in stereo. auto-sap select to automatically switch the projection tv to second audio programs when a signal is received. (if no sap signal is present, the projection tv remains in stereo mode.) mono select for mono reception. (use to reduce noise during weak stereo broadcasts.)
using the menus 51 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus speaker on select to turn on the projection tv speakers. off select to turn off the projection tv speakers and listen to the projection tv's sound only through your external audio system speakers. audio out easy control of volume adjustments variable the projection tv ? s speakers are turned off, but the volume output from your audio system can still be controlled by the projection tv ? s remote control. fixed the projection tv ? s speakers are turned off and the volume, bass and treble output of the projection tv is fixed. use your audio receiver ? s volume control to adjust the volume through your audio system. option description
using the menus 52 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the channel menu to select the channel menu 1 1 1 1 press menu . 2 2 2 2 move the joystick to the channel icon and press . 3 3 3 3 use the joystick to scroll through the features. 4 4 4 4 press to select a feature. that feature ? s options appear. 5 5 5 5 use the joystick to scroll through the options. 6 6 6 6 press to select the desired option. 7 7 7 7 press menu to exit the menu screen. selecting channel options the channel menu includes the following options: video audio channel setup parent timer favorite channel:auto cable:on channel fix:off auto program channel skip/add channel label move: select: end: menu option description favorite channel auto select if you want favorite channel options to be set automatically to the last eight channels selected with the 0-9 buttons. manual select if you want to input your own selections as favorite channel options. 1 1 1 1 press to select a favorite channel number. 2 2 2 2 use the joystick to scroll through the channels until you find the channel you want to add to your favorites. 3 3 3 3 press to select it. cable on select if you are receiving cable channels with a catv cable. off select if you are using an antenna. ? you should run auto program after changing the cable setting.
using the menus 53 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus channel fix useful when you have a cable box or satellite receiver connected 2-6 ? fix ? your projection tv ? s channel setting to 3 or 4 and use the cable box, vcr or satellite receiver to change channels. select one of these settings if you have connected the device to the vhf/uhf jack. aux 2-6 same as 2-6, except you select one of these settings if you have connected the device to the aux jack. (see page 15) video 1 use when connecting an av receiver to control external video sources. tv output should be connected through the av receiver. auto program automatically programs the projection tv for all receivable channels. channel skip/add removes and adds viewable channels. 1 1 1 1 use the joystick to scroll through the channels until you find the channel you want to skip/add. 2 2 2 2 press to select it. 3 3 3 3 press the joystick up or down to toggle between ? add ? and ? skip. ? 4 4 4 4 press to select. channel label label up to 20 channels with their station call letters. option description
using the menus 54 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the parent menu the parent menu allows you to set up the tv to block programs according to their content and rating levels. these ratings are assigned by a federal rating board. not all programs are rated. using the parental lock blocks programs with a specific rating, but it does not block an entire channel. using the parent menu to select the rating first, set a password, then select the country you reside in (u.s.a. or canada) and your desired rating. 1 1 1 1 press menu . 2 2 2 2 move the joystick to the parent icon and press . 3 3 3 3 use the 0-9 buttons on the remote control to enter your four-digit password. 4 4 4 4 confirm your password by entering it again. your password is stored and the parent menu options appear. 5 5 5 5 make sure that ? country ? is selected, and press . ? channel index will not function when parental lock is activated. ? you need the password entered here for any future access into the parent menu. if you lose your password, see ? lost password ? on page 71. ? if you want to change the password, see page 56.
using the menus 55 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus 6 6 6 6 move the joystick up or down to select u.s.a. or canada according to the country you reside in, and press . 7 7 7 7 move the joystick down to select ? parental lock ? , and press . 8 8 8 8 move the joystick up or down to select a desired rating, and press . if you select child, youth, young adult or custom, the parental control is activated automatically. if you want to select the ratings from custom, see ? using custom rating options ? on page 57. 9 9 9 9 press menu to exit the menu screen. (continued)
using the menus 56 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] the parent menu includes the following options. to deactivate the parental control feature ? set parental lock to off when in the parent menu. to change the password 1 1 1 1 select change password option when in the parent menu using the joystick, and press . 2 2 2 2 enter a new four-digit password using the 0-9 buttons. 3 3 3 3 confirm the new password by entering it again. 4 4 4 4 press menu to exit the menu screen. viewing blocked programs you can view a blocked program by entering the password. 1 1 1 1 press enter when tuned to a blocked program. 2 2 2 2 enter your password using the 0-9 buttons. parental control will be canceled temporarily until you turn your projection tv off. option description parental lock turn ratings on/ off and select a rating system off parental lock is off. no programs are blocked from viewing. child maximum ratings permitted are: ? us: tv-y, tv-g, g ? canada: tv-y, c, g yo u t h maximum ratings permitted are: ? us: tv-pg, pg ? canada: tv-pg, pg, 8 ans+ young adult maximum ratings permitted are: ? us: tv-14, pg-13 ? canada: tv-14, 14+, 13 ans+ custom select to set ratings manually. ? us: see page 60 for details. ? canada: see page 61 for details. change password for changing your password. (see below) for descriptions of child, youth, and young adult ratings, see pages 60 and 61. z z
using the menus 57 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus using custom rating options if you want to select the ratings to be blocked from custom, follow the procedure below. 1 1 1 1 perform the steps 1 to 7 in ? to select the rating ? on page 54 to display the parental lock options. 2 2 2 2 move the joystick up or down to select ? custom, ? and press . 3 3 3 3 make sure that ? movie ratings ? is selected, and press . 4 4 4 4 move the joystick up or down to select the rating to be blocked, and press . the indicator automatically appears beside the selected rating and all ? higher ? ratings, indicating that the programs that match the ratings will be blocked. to unblock a rating, select it by moving the joystick up or down, then press . the indicator changes into ? - ? and all ? lower ? ratings are unblocked. (continued)
using the menus 58 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 5 5 5 5 move the joystick left, then down, to select ? tv rating ? or ? program, ? and press . 6 6 6 6 the ? tv rating ? setting menu appears. 7 7 7 7 move the joystick up or down to select the rating to be blocked, and press . the indicator automatically appears beside the selected rating and all ? higher ? ratings, indicating that the programs that match the ratings will be blocked. to unblock a rating, select it by moving the joystick up or down, then press . the indicator changes into ? - ? and all ? lower ? ratings are unblocked. some tv ratings have additional content ratings called ? extenders. ? the extenders are defined as follows: d (sexually suggestive dialog), fv (fantasy violence), l (coarse language), s (sexual situations) and v (violence). by setting the extenders, you can define additional viewing limits. all of the extenders included in the selected ratings will be blocked. if you wish to allow any of them to be viewed, go to step 8.
using the menus 59 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus 8 8 8 8 move the joystick left or right to select the extender to be viewed, and press . ??? appears beside the selected extender, indicating that the programs that match the extender can be viewed. if you press again, is displayed to show that the programs that match the extender will be blocked again. 9 9 9 9 repeat step 8 for other extenders. all programs that match the ratings you select and higher, except for the extenders that were canceled, will be blocked. 10 10 10 10 press menu to exit the menu screen.
using the menus 60 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] us custom rating options if you selected u.s.a. as the country of residence on page 54, the custom rating menu includes the following options. (if you selected canada, see page 61.) option description movie rating g all children and general audience. pg parental guidance suggested. pg-13 parental guidance for children under 13. r restricted viewing, parental guidance is suggested for children under 17. nc-17 and x no one 17 and under allowed. tv rating block programs by their rating, content or both age-based options tv-y all children. tv-y7 directed to older children. tv-g general audience. tv-pg parental guidance suggested. tv-14 parents strongly cautioned. tv-ma mature audience only. content-based options fv fantasy violence. d suggestive dialogue. l strong language. s sexual situations. v violence. unrated block programs or movies that are broadcast without a rating block blocks all programs and movies that are broadcast without a rating. allow allows programs and movies that are broadcast without a rating. ? the content ratings will increase depending on the level of the age-based rating. for example, a program with a tv-pg v (violence) rating may contain moderate violence, while a tv-14 v (violence) rating may contain more intense violence. to ensure maximum blocking capability, the age-based ratings should be blocked. if you choose to block unrated tv programs, please be aware that the following programs may be blocked: emergency broadcasts, political programs, sports, news, public service announcements, religious programs and weather. z z
using the menus 61 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus canadian custom rating options if you selected canada as the country of residence on page 54, the custom rating menu includes the following options. (if you selected u.s.a., see page 60.) option description english rating c all children. c8+ children 8 years and older. g general programming. pg parental guidance. 14+ viewers 14 and older. 18+ adult programming. french rating g general programming. 8 ans+ not recommended for young children. 13 ans+ not recommended for ages under 13. 16 ans+ not recommended for ages under 16. 18 ans+ programming restricted to adults. usa rating see ? tv rating ? on page 60 for details.
using the menus 62 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the timer menu to select the timer menu 1 1 1 1 press menu . 2 2 2 2 move the joystick to the timer icon and press . to set the current time 1 1 1 1 use the joystick to select ? current time ? , then press . 2 2 2 2 if it is currently daylight saving time, be sure to set the mode to ? on ? first. 3 3 3 3 use the joystick to enter the correct time, then press . 4 4 4 4 press menu to exit the menu screen. to set the timer before setting the timer, be sure to set your projection tv ? s clock to the current time and daylight saving mode. 1 1 1 1 move the joystick to ? timer 1 ? or ? timer 2 ? , then press . 2 2 2 2 use the joystick to enter your day, time and channel preferences, then press to select each one. 3 3 3 3 press menu to exit the menu screen. to reset the clock or timers ? press reset on the remote control after selecting that option in the timer menu. selecting timer options the timer menu includes the following options: option description timer 1 timer 2 program select to set the timer by day, time, duration, and channel. off select to turn off the timer. (your previous settings will be saved.) current time set the current time. daylight saving on select in the spring to adjust the time during daylight saving time. off select in the fall to adjust the time at the end of daylight saving time.
using the menus 63 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] using the menus using the setup menu to select the setup menu 1 1 1 1 press menu . 2 2 2 2 move the joystick to the setup icon and press . 3 3 3 3 use the joystick to scroll through the features. 4 4 4 4 press to select a feature. that feature ? s options appear. 5 5 5 5 use the joystick to scroll through the options. 6 6 6 6 press to select the desired option. 7 7 7 7 press menu to exit the menu screen. selecting setup options the setup menu includes the following options: option description caption vision allows you to select from three closed caption modes (for programs that are broadcast with closed caption). off turns off caption vision. cc1, cc2, cc3, cc4 displays a printed version of the dialog or sound effects of a program. (should be set to cc1 for most programs.) text1, text2, text3, text4 displays network/station information presented using either half or the whole screen (if available). for closed captioning, set to cc1 . xds (extended data service) displays a network name, program name, program length, and time of the show if the broadcaster offers this service. (continued)
using the menus 64 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] video label allows you to label the audio/video components you connected to the projection tv so you can identify them when using tv/ video . when in the setup menu ? s video label feature, use the joystick to highlight an input to label, then press to select it. use the joystick to scroll through the labels. press to select the component you connected to each of the input jacks on the back of your projection tv. select ? skip ? if you do not have a component connected to a particular set of input jacks. video 1/2/3/4 vhs, 8mm, beta, ld, game, sat, dvd, web, receiver, dtv, skip video 5/6 dvd, dtv, hd, skip if you select ? skip ? , your projection tv skips this connection when you press tv/video . ? when you select ? receiver ? on video label, your projection tv ? s input is fixed. language select to display all on-screen menus in your language of choice: english, espa ? ol, fran ? ais . 16:9 enhanced provides enhanced picture resolution for widescreen sources, such as selected dvd titles (only available when the projection tv is in video mode). press tv/video and select from one of the following options: auto to activate automatically when a 16:9 signal is received. on to activate manually. off to deactivate manually. ? auto/on will appear when projection tv is in video mode 1-6. on/off will appear when projection tv is in video mode 5-6 and the 480p signal occurs. option description to use this feature with widescreen dvds, set your dvd player to 16:9 aspect ratio. z
65 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] other information programming the remote control the remote control is preset to operate sony brand video equipment. if you have video equipment other than sony brand that you want to control with the projection tv ? s remote control, use the following procedures to program the remote control. from the ? manufacturer ? s codes ? listed on page 67, select the three-digit code number for the manufacturer ? s code for your component. if more than one code number is listed, start with the number listed first. use the code number to complete the following procedure. to program a cable box or a satellite receiver 1 1 1 1 open the panel of the remote control. 2 2 2 2 press code set inside the panel. 3 3 3 3 close the panel and press sat/cable (functon) . 4 4 4 4 enter the three-digit manufacturer ? s code number using the 0-9 buttons. 5 5 5 5 press enter . 6 6 6 6 to check if the code number works, aim the projection tv ? s remote control at the component and press the green power button that corresponds with that component. if it responds, the programming is completed. if not, try using the other codes listed for that manufacturer. sony equipment switch position on remote control programmable code number beta, ed beta vcrs av1 303 8 mm vcr av2 302 vhs vcr av3 301 dvd player dvd 751 ? the equipment must have infrared (ir) remote capability in order to be used with the remote control. (continued)
other information 66 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] to program video equipment 1 1 1 1 open the panel of the remote control. 2 2 2 2 move the slide switch to the desired component type. 3 3 3 3 press code set inside the panel. 4 4 4 4 close the panel and enter the three-digit manufacturer ? s code number using the 0-9 buttons. 5 5 5 5 press enter . 6 6 6 6 to check if the code number works, aim the projection tv ? s remote control at the component, open the panel, and press the green power button. if it responds, the programming is completed. if not, try using the other codes listed for that manufacturer. tips ? if more than one code number is listed, try entering them one by one until you come to the correct code for your component. ? if you enter a new code number, the code number you previously entered at that setting is erased. ? in some rare cases, you may not be able to operate your component with the sony remote control. in this case, use the component ? s own remote control unit. ? you must perform step 4 within 10 seconds of step 3, or you must start again from step 3.
other information 67 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] other information manufacturer s codes vcrs dvd players cable boxes satellite receivers manufacturer code sony 301 admiral (m. ward) 327 aiwa 338, 344 audio dynamic 314, 337 broksonic 319, 317 canon 309, 308 citizen 332 craig 302, 332 criterion 315 curtis mathes 304, 338, 309 daewoo 341, 312, 309 dbx 314, 336, 337 dimensia 304 emerson 319, 320, 316, 317, 318, 341 fisher 330, 335 funai 338 general electric 329, 304, 309 go video 322, 339, 340 goldstar 332 hitachi 306, 304, 305,338 instant replay 309, 308 jc penney 309, 305, 304, 330, 314, 336, 337 jvc 314, 336, 337, 345, 346, 347 kenwood 314, 336, 332, 337 lxi (sears) 332, 305, 330, 335, 338 magnavox 308, 309, 310 marantz 314, 336, 337 marta 332 memorex 309, 335 minolta 305, 304 mitsubishi/ mga 323, 324, 325, 326 multitech 325, 338, 321 nec 314, 336, 337 olympic 309, 308 optimus 327 panasonic 308, 309, 306, 307 pentax 305, 304 philco 308, 309 philips 308, 309, 310 pioneer 308 quasar 308, 309, 306 rca/ proscan 304, 305, 308, 309, 311, 312, 313, 310, 329 realistic 309, 330, 328, 335, 324, 338 sansui 314 samsung 322, 313, 321 sanyo 330, 335 scott 312, 313, 321, 335, 323, 324, 325, 326 sharp 327, 328 shintom 315 signature 2000 (m. ward) 338, 327 sv2000 338 sylvania 308, 309, 338, 310 symphonic 338 tashiro 332 tatung 314, 336, 337 teac 314. 336, 338, 337 technics 309, 308 toshiba 312, 311 manufacturer code wards 327, 328, 335, 331, 332 yamaha 314, 330, 336, 337 zenith 331 manufacturer code sony 751 panasonic 753 pioneer 752 rca 755 toshiba 754 manufacturer code hamlin/regal 222, 223, 224, 225, 226 jerrold/g. i. 201, 202, 203, 204, 205, 206, 207, 208, 218 oak 227, 228, 229 panasonic 219, 220, 221 pioneer 214, 215 scientific atlanta 209, 210, 211 tocom 216, 217 zenith 212, 213 manufacturer code sony 801 general electric 802 hitachi 805 hughes 804 panasonic 803 rca/ proscan 802, 808 toshiba 806, 807 manufacturer code
other information 68 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] operating other components with your projection tv remote control operating a vcr open the panel and move the slide switch to the av input you coded for this device. operating a dvd player open the panel and move the slide switch to the dvd input you coded for this device. to do this ... press turn on/off green power button (inside the panel) change channels ch +/ ? record n and simultaneously play n stop x fast forward m rewind the tape m pause x (press again to resume normal playback) search the picture forward or backward m or m during playback (release to resume normal playback) change input mode slide switch to do this ... press turn on/off green power button (inside the panel) play n stop x pause x (press again to resume normal playback) step through different tracks of an audio disc m to step forward or m to step backward step through different chapters of a video disc ch+ to step forward or ch ? to step backward display the dvd menu dvd menu select tracks directly 0-9 buttons display the menu (setup) menu display the dvd title dvd title operate the dvd menu m m < ,
other information 69 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] other information operating a cable box operating a satellite receiver to do this ... press turn on/off sat/cable (power) select cable box sat/cable (function) select a channel 0-9 buttons, enter change channels ch +/ ? back to previous channel jump to do this ... press turn on/off sat/cable (power) select satellite receiver sat/cable (function) select a channel 0-9 buttons, enter change channels ch +/ ? back to previous channel jump display channel number display display dbs guide guide display dbs menu menu move highlight (cursor) joystick or arrows select item
other information 70 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] troubleshooting if, after reading these operating instructions, you have additional questions related to the use of your sony television, please call our customer information services center at 1-800-222-sony (7669) (u.s. residents only) or (416) 499-sony (7669) (canadian residents only). problem possible remedies no picture (screen not lit), no sound ? make sure the projection tv ? s power cord is connected securely to the wall outlet. ? push the power button on the front of the projection tv. ? check to see if the tv/video setting is correct: when watching tv, set to tv, and when watching connected equipment, set to video 1, 2, 3, 4, 5 or 6 . ? try another channel. it could be station trouble. ? the parental control feature is activated. (see ? using the parent menu ? on page 54) ? if your projection tv does not turn on, and a red light keeps flashing, your projection tv may need service. call your local sony service center. remote control does not operate ? batteries could be weak. replace the batteries. ? press tv (function) when operating your projection tv. ? make sure the projection tv ? s power cord is connected securely to the wall outlet. ? locate the projection tv at least 3-4 feet away from fluorescent lights. ? check the orientation of the batteries. dark, poor or no picture (screen lit), good sound ? adjust the picture setting in the video menu. (see page 48) ? adjust the brightness setting in the video menu. (see page 48) ? check antenna/cable connections. ? adjust the convergence again using flash focus . (see ? adjusting the convergence automatically ? flash focus ? ?? on page 33) good picture, no sound ? press muting so that ? muting ? disappears from the screen. (see page 34) ? make sure speaker is set to on in the audio menu. (see page 51) ? check the mts setting in the audio menu. (see ? mts ? on page 50) cannot receive digital channels (when a dtv receiver is connected) ? check the connections between the dtv receiver and the projection tv. (see page 28) ? check your local listings to find out if you can receive digital broadcasts in your area. cannot receive upper channels (uhf) when using an antenna ? change cable to off. (see page 52) ? use auto program in the channel menu to add receivable channels that are not presently in tv memory. (see page 53) no color ? adjust the color settings in the video menu. (see page 48) only snow and noise appear on the screen ? check the cable setting in the channel menu. (see ? cable ? on page 52) ? check the antenna/cable connections. ? make sure the channel is broadcasting programs. ? press ant to change the input mode. (see page 37) dotted lines or stripes ? adjust the antenna. ? move the projection tv away from noise sources such as cars, neon signs, or hair- dryers.
other information 71 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] other information projection tv is fixed to one channel ? use auto program in the channel menu to add receivable channels that are not presently in tv memory. (see page 53) ? check your channel fix settings. (see page 53) double images or ghosts ? use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings). cannot operate menu ? if the item you want to choose appears in gray, you cannot select it. ? turn the projection tv ? s power off and on again. cannot receive any channels when using cable tv ? use auto program in the channel menu to add receivable channels that are not presently in tv memory. (see page 53) ? check your cable settings. ? make sure cable is set to on in the channel menu. (see page 52) cannot gain enough volume when using a cable box ? increase the volume of the cable box using the cable box ? s remote control. then press tv (function) and adjust the projection tv ? s volume. channel index does not display all available channels ? make sure cable is set to on in the channel menu. (see ? cable ? on page 52) ? use auto program in the channel menu to add receivable tv channels that are not presently in tv memory. (see page 53) cannot receive channels unable to select a channel ? use auto program in the channel menu to add receivable tv channels that are not presently in tv memory. (see page 53) lost password ? in the password screen (see page 54), enter the following master password: 4357. the master password clears your previous password; it cannot be used to temporarily unblock channels. cannot change channels with the remote control ? be sure you have not inadvertently switched your projection tv from channel 3 or 4 setting if you are using another device to change channels. ? if you are using another device to control channels, be sure the ? function ? button for that device has been pressed, or the slide switch is set correctly. for example, if you are using your cable to control channels, be sure to press sat/cable . cannot cycle through the other video equipment connected to the projection tv ? be sure the video label feature has not been set to skip . (see page 64) there is a black box on the screen ? you have selected a text option in the setup menu and no text is available. (see page 63 to reset setup selections) to turn this feature off, select off in the caption vision option. if you were trying to get closed captioning, select cc1 instead of tex t 1 - 4 . there is no twin picture or it is just static ? be sure your twin picture is set to a video source/channel that has a program airing. ? you may be tuned to a video input with nothing connected to it. try cycling through your video inputs using tv/video . ? twin view is not set to receive a signal from the aux input. if you have connected a vcr, dvd player or satellite receiver to the aux input on the projection tv, it will not show in the second picture. problem possible remedies (continued)
other information 72 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] i get the same program in the window picture as in the main picture ? both may be set to the same channel. try changing channels in either the main picture or the window picture. ? you may be running all your channels through a cable box. the cable box will only unscramble one signal at a time, so you cannot use the twin view feature. if possible, run a direct cable to your projection tv ? s vhf/uhf input. (this will only work if your cable system provides an unscrambled signal.) i cannot get anything but tv channels in my second picture ? be sure the video label has not been set to skip your video inputs. see the setup menu on page 63. favorite channel does not display your choices ? verify that favorite channel is set to manual in the channel menu. (see ? favorite channel ? on page 52) some video sources do not appear when you press tv/ video ? ensure that video label is not set to skip. (see ? video label ? on page 64) problem possible remedies
other information 73 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] other information specifications projection system 3 picture tubes, 3 lenses, horizontal in-line system picture tube 7-inch high-brightness monochrome tubes (6.3 raster size), with optical coupling and liquid cooling system projection lenses high performance, large diameter hybrid lens f1.1 antenna 75 ohm external terminal for vhf/uhf television system ntsc, american tv standard screen size (measured diagonally) 43 inches (kp-43ht20) 53 inches (kp-53hs20, kp-53hs30) 61 inches (KP-61HS20, kp-61hs30) channel coverage vhf 2-13 uhf 14-69 catv 1-125 power requirements 120v, 60 hz number of inputs/outputs video (in) 4 1 vp-p, 75 ohms unbalanced, sync negative s video (in) 3 y: 1 vp-p, 75 ohms unbalanced, sync negative c: 0.286 vp-p (burst signal), 75 ohms audio (in) 6 500 mvrms (100% modulation) impedance: 47 kiloohms audio (var/fix) out 1 500 mvrms (100 % modulation), impedance: 470 ohms tv out 1 1 vp-p, 75 ohms unbalanced, sync negative control s (in/out) 1 minijacks component video input 2 (y, p b , p r ) y: 1.0 vp-p, 75 ohms unbalanced, sync negative p b : 0.7 vp-p, 75 ohms p r : 0.7 vp-p, 75 ohms rf inputs 2 converter 1 (continued)
other information 74 model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] design and specifications are subject to change without notice. supplied accessories remote control rm-y908 aa (r6) batteries 2 supplied for remote control optional accessories av cable vmc-810/820/830 hg audio cable rkc-515hg control s cable rk-g69hg component video cable vmc-10/30 hg av r e c e i v e r s t r - v 5 5 5 e s tv stand su-43ht4/43ht5 speaker output 20 w 2 (kp-43ht20, kp-53hs30, kp-61hs30) 18 w 2 (kp-53hs20, KP-61HS20) dimensions (w h d) 38 42 1 / 8 22 4 / 3 inches (965 1,069 577 mm) (kp-43ht20) 46 1 / 2 55 7 / 8 25 inches (1,180 1,417 632 mm) (kp-53hs20, kp- 53hs30) 54 61 1 / 2 26 1 / 4 inches (1,370 1,560 666 mm) (KP-61HS20, kp- 61hs30) mass 119 lb 8 oz (54.2 kg) (kp-43ht20) 152 lb 9 oz (69.2 kg) (kp-53hs20) 157 lb (71.2 kg) (kp-53hs30) 203 lb 11 oz (92.4 kg) (KP-61HS20) 210 lb 5 oz (95.4 kg) (kp-61hs30) power consumption in use 230 w in standby under 1 w
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 75 other information index 16:9 (widescreen) 8 , 64 a activating a twin view screen 41 adding channels to the channel list 53 adjusting audio, steady sound 50 ant button 34 antenna, connecting aspect ratio, 16:9 in twin view 42 audio menu 47 , 50 audio receiver, connecting 25 audio/video cable 12 auto program (channel setup) 32 , 53 auto setup 32 , 53 av receiver, connecting to tv out 15 b balance, adjusting 50 bass, adjusting 50 batteries, inserting in remote 10 bilingual audio 50 blocking programs. see ratings. brightness, adjusting 48 c cable setting on/off 52 with vcr, connecting 19 cable box connecting with vcr 20 using with tv remote control 69 camcorder, connecting 29 caption vision 63 catv. see cable. channel index described 9 using 45 channel list, adding channels 53 channel menu 47 , 52 channel skip/add 53 channels auto program 53 creating labels 53 setting up 32 cinemotion, drc 35 , 49 closed caption modes 63 code set button 36 color temperature, adjusting 48 color, adjusting 48 connecting audio receiver 25 av receiver 30 cable box 17 , 18 , 20 cable or antenna 16 camcorder 29 digital tv receiver 28 dvd player 26 , 27 satellite receiver 23 , 24 vcr 20 ? 22 , 24 connector types 12 contents of box 10 control s 31 convergence, adjusting automatically 33 d daylight saving 62 digital reality creation 49 digital tv connecting 28 watching 39 digital tv program 39 digital tv receiver, connecting 28 display button 34 display, turning off 34 drc (digital reality creation) mode, described 8 drc ? cinemotion button 35 dvd menu button 36 dvd player using with tv remote control 68 with a/v connectors, connecting 27 with component video connectors, connecting 26 dvd title button 36 e enhanced picture resolution, 16:9 64 enlarging pictures, in twin view 43 extended data service 63 (continued)
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 76 f favorite channel auto 52 described 8 manual 52 setting up 52 using 40 favorites button 34 features 8 flash focus described 9 performing 33 freeze button 34 freeze, using 37 , 44 front panel controls 13 function buttons (white) 35 h hookups 16 hue, adjusting 48 i inputs, labeling 64 installation of the projection tv 16 ? 31 j jump button 34 jump, using 37 l label channels 53 video inputs 64 locking programs 54 m menu button 35 menus audio 47 , 50 channel 47 , 52 parent 47 setup 47 , 63 timer 47 , 62 video 47 , 48 mode movie 38 pro 38 standard 38 vivid 38 mts/sap button 36 mts/sap, using 38 muting, using 37 p parent menu 47 , 54 parental control, described 8 password, changing 56 pic mode button 34 picture contrast, adjusting 48 picture size, adjusting in twin view 43 power button 36 power buttons (green) 35 presetting channels 32 problems, troubleshooting 70 r ratings setting 54 ? 56 viewing blocked programs 56 rear panel controls and connections 14 , 15 remote control buttons inside panel 36 function of buttons 37 inserting batteries 10 programming 65 ? 67 remote control, operating other components with cable box 69 dvd player 68 satellite receiver 69 vcr 68 removing channels from the channel list 53 reset button 34 resetting audio options 50 timer options 62 video options 48 s s video cable 12 sat/cable function button 35 sat/cable power button 35 satellite receiver connecting 23 using with tv remote control 69 setting up channels 32 setup menu 47 , 63 sharpness, adjusting 48 sleep button 34
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] 77 other information sleep, using 38 specifications 73 ? 74 steady sound adjusting 50 described 8 surround sound 50 system off button 36 t tape-to-tape editing 22 time set current 62 set daylight saving 62 timer menu 47 , 62 timer setting 62 treble, adjusting 50 troubleshooting 70 tv function button 35 tv power button 35 tv/video button 35 twin view ? activating a picture 41 described 8 using 41 v vcr connecting two, for tape editing 22 using with tv remote control 68 with cable box, connecting 20 with cable, connecting 19 with satellite receiver, connecting 24 video inputs, labeling 64 video menu 47 , 48 video modes, selecting 48 viewing area, recommended 11 vol +/ ? button 34 vol +/ ? buttons 37 w widescreen 64 widescreen, described 8 z zoom feature, with twin view 43
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)]
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)]
model name1[kp-43ht20] model name2[kp-53hs20/30] model name3[KP-61HS20/30] [4-081-143-11 (1)] printed in u.s.a. if, after reading this instruction manual, you have additional questions related to the use of your sony projection tv, please call one of the following numbers (english only). customers in the continental united states contact the direct response center at: 1-800-222-sony (7669) customers in canada contact the customer relations center at: (416) 499-sony (7669)

▲Up To Search▲

Price & Availability of KP-61HS20

	To Download KP-61HS20 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .